Replacing the net bag on your Rising Fishing net is a simple way to extend the life of your favorite landing net. Whether your original bag has worn out after years of use or you want to switch to a different depth or mesh, a new bag gets your net back in service without replacing the whole frame. This guide walks you through the install step by step.
Watch the Net Bag Install
Why Replace a Net Bag?
A landing net takes a lot of abuse over a season. Mesh stretches, knots loosen, and a bag that has seen years of fish and rocks eventually needs to be swapped. Replacing just the bag is far more affordable than buying a new net, and it lets you keep the frame and handle you already trust. It is also a chance to change your setup, since a deeper bag or a different mesh can better suit the water and the fish you target.
What You Need Before You Start
Have your Rising net frame, the replacement net bag, and a clean flat surface to work on. Lay everything out so you can see the full hoop and the opening of the new bag. Working slowly and keeping the mesh untwisted makes the whole process easier.
How to Install a Replacement Net Bag Step by Step
- Remove the old bag from the frame and check that the hoop and channel are clean and free of debris.
- Find the opening of the new net bag and orient it so the mesh hangs straight without any twists.
- Start the new bag onto the frame at one point on the hoop, then work it around evenly in both directions.
- Seat the bag fully into the channel or attachment points all the way around the hoop so it is held securely.
- Check that the bag is even, untwisted, and firmly attached before you take the net back out on the water.
Get More Life From Your Net
A fresh net bag makes an old frame feel new again and keeps your gear out of the landfill a little longer. With the bag installed evenly and seated all the way around, your Rising net is ready for the next fish. Take a minute to inspect the mesh and the attachment points each season so you know when it is time for another swap.
